mechanical LOC

Standing Seam Panel System

The Mechanical Loc panel is a commercial grade panel that is mechanically seamed and installed with a concealed clip system. This panel is ideal for shallow sloped roofs and is available in 2”, 1.5” and 1” seam heights. The appeal of the Mechanical Loc system is the long clean lines and wide panel spans. Moreover, this system provides superior weather-tight protection and allows for thermal expansion and contraction with a floating clip system. Mechanical Loc is available with minor ribs and comes in variable widths. Mechanical Loc requires on-site seaming.

The use of a proper underlayment is vital to the performance of any roofing system. Forma Steel strongly recommends the use of a peel and stick membrane for any slopes lower than 3/12. Since every project is different, care and attention should be paid to the product that is being specified so that the building performs as designed. Venting, breathability and water resistance are all components of a building envelope and should be confirmed with building designers for optimal performance.

Panel Profile


2" Mechanical Loc


Forma Loc Panel by Forma Steel in 12" or 16" Coverage

1.5" Mechanical Loc

*also available in 1"

Forma Loc Panel by Forma Steel in 12" or 16" Coverage

Available in Standard 24 Gauge Colours


Galvalume

Bright White

White White

Iceberg

Bone White

Wicker

Stone Grey

Hickory

Tan

Buckskin

Coffee Brown

Dark Brown

Black

Carbon

Charcoal

Zinc Grey

Regent Grey

Bright Red

Tile Red

Dark Red

Slate Blue

Oxford Blue

Royal Blue

Heron Blue

Sapphire Blue

Melchers Green

Silver Sage Textured

Ash Grey Textured


Specifications

Application: Roof & Wall

Coverage: 12" to 16"

Concealed Clip System

Panel Length: Up to 50 feet

For panels longer than 50 feet, please contact Forma Steel to discuss options

Minimum Length: 12"

2" Mechanical Loc is Suitable for Low Sloped Roofs down to 3/4:12

1.5" Mechanical Loc is Suitable for Low Sloped Roofs down to 1.5:12

1" Mechanical Loc is Suitable for Low Sloped Roofs down to 3:12

Substrate:
Walls:
1/2" Standard Plywood Minimum
Roof:
5/8" Standard Plywood Minimum

Suitable for climates with high wind, high snow accumulation & extreme temperatures

Available Gauges: 24 (in standard colours)

Note: Striations are recommended on panels to minimize the appearance of oil-canning.

*Seaming tool is required.


Product Brochures


MECHANICAL LOC BROCHURE

MECHANICAL LOC INSTALL GUIDE

STANDARD COLOUR CHART

2000 SERIES TRIMS (2")

1500 SERIES TRIMS (1-1/2")

STANDARD TRIMS

Installation


The use of a proper underlayment is vital to the performance of any roofing system. Forma Steel strongly recommends the use of a peel and stick membrane for any slopes lower than 3/12.

Since every project is different, care and attention should be paid to the product that is being specified so that the building performs as designed.

Venting, breathability and water resistance are all components of a building envelope and should be confirmed with building designers for optimal performance.

Inspiration Gallery

Wellness Centre
Wellness Centre
Wellness Centre
Wellness Centre
Clubhouse Exterior
Clubhouse Exterior
Clubhouse Exterior
Clubhouse Exterior
Clubhouse Exterior
Regent Grey Mechanical Loc
Regent Grey Mechanical Loc


Find Forma Steel Products Near You.


Forma Steel distributes through a network of Retail Partners throughout Western Canada. We can work with you to acquire the right materials and designs for any creative vision from conception to final physical form. Ask for Forma Steel at your local building supply store or lumber yard.


FIND A RETAIL PARTNER NEAR YOU
Image

Looking for a Custom Steel Panel?


At Forma Steel we have the ability to create just about anything! From Box Rib and Board & Batten Profiles to tweaks to current panels to fit your project - Contact us today to discuss your custom ideas!


CONTACT US NOW