FR Panel
Commercial Profile with the Largest SpansThe FR panel features the largest span at 12" and highest rib height at 1-1/4", offering the most dramatic and pronounced panel profile. This wide-span profile is a go-to choice for many commercial installations, and pairs well with our FA panel, a widespan reverse profile. The FR panel also performs extremely well on low-sloped roofs. Available in Reverse for architectural applications, the FR panel is a versatile profile for commercial buildings.
Panel Profile
All
26 Gauge
24 Gauge
Galvanized
Galvalume
Bright White
White White
Iceberg
Bone White
Iceberg
Wicker
Stone Grey
Hickory
Tan
Buckskin
Coffee Brown
Dark Brown
Black
Carbon
Charcoal
Regent Grey
Bright Red
Tile Red
Dark Red
Slate Blue
Oxford Blue
Royal Blue
Heron Blue
Sapphire Blue
Melchers Green
Perforated-CHAR
Autumn Woodgrain
Gunstock Woodgrain
Frontier Woodgrain
Saddle Woodgrain
Espresso Woodgrain
Barnboard Woodgrain
Concrete
Rustic
Light Pine Woodgrain
Graphite Textured
Arctic White Textured
Onyx Black Textured
Burnished Slate Textured
Red Oxide Textured
Silver Sage Textured
Ash Grey Textured
Specialty Steel
All
26 Gauge
24 Gauge
22 Gauge
Espresso Woodgrain
Dark Walnut Woodgrain
Gunstock Woodgrain
Frontier Woodgrain
Saddle Woodgrain
Autumn Woodgrain
Light Pine Woodgrain
Obsidian Oak Woodgrain
Barnboard Woodgrain
Concrete
Rustic
Onyx Black Textured
Burnished Slate Textured
Fossil Texture
Graphite Textured
Red Oxide Textured
Arctic White Textured
White Perforated
Black Perforated
Weathering Steel
Silver Sage Textured
Ash Grey Textured
Specifications
Application: Roof & Wall
Coverage: 36" | Depth: 1-1/4"
Available Gauges: 24 & 26
Available in 40+ Standard Colours & Specialty Finishes
Slope: 1/12 with overlap sealant (or 2/12 without)
Note: Confirm with construction standards and underlayment manufacturing
Commercial Profile with Largest Spans
Excellent Performance on Low Sloped Roofs
More colours & gauges are available by special order
Cutting charge applies below 48"
*Require a Minimum Total Length of: 32"
For Example:
• Short Sheets of 12" Require Sets of 3
• Short Sheets of 8" Require Sets of 4
• Short Sheets over 16" Require Sets of 2
Product Brochures
FR PANEL BROCHURE
STANDARD COLOUR CHART
STANDARD TRIMS
FR LOAD TABLE
FR INSTALLATION GUIDE
Installation
The use of a proper underlayment is vital to the performance of any roofing system. Forma Steel strongly recommends the use of a peel and stick membrane for any slopes lower than 3/12. Since every project is different, care and attention should be paid to the product that is being specified so that the building performs as designed.
Venting, breathability and water resistance are all components of a building envelope and should be confirmed with building designers for optimal performance.
View Our Complete Line-up of Steel Roofing and Siding Panels
Forma Steel offers 6 Standard Profiles in 29, 26 & 24 Gauge. Along with our FormaLoc and FormaPlank products, we have a roofing and siding solutions for just about every application. Learn more about our line-up of steel roofing and siding panels.
VIEW ALL AVAILABLE PROFILES & PANELS